BIM Drafting Companies in Dubai That Actually Get It Done

Dubai doesn’t ease up when it comes to construction. Timelines are tight, sites are fast-moving, and drawings need to match what’s happening on the ground – not just look good in a folder. That’s where solid BIM drafting steps in.

Whether it’s floor plans, fabrication sets, or Revit models with clean clash checks, the key is the same: get the documentation right the first time. Below is a group of firms that’ve built up steady drafting workflows across architecture, structure, and MEP. All active in Dubai. All used to working under pressure.

2. Silicon Engineering Consultants

Silicon Engineering runs drafting across all scopes – architecture, structure, MEP, and civil – mainly through Revit and AutoCAD. Work usually starts with a scan or 2D layout and moves into 3D models, then detailing for construction. LOD specs from early sketches to full install sets are handled in sequence.

Drafting outputs include floor plans, framing details, and MEP files ready for installation. The firm also includes COBie integration and clash detection where required, helping reduce back-and-forth during fit-out or prefabrication stages.

Key Highlights:

• BIM drafting handled locally in Dubai
• Full coverage: architectural, structural, and MEP scopes
• Scan-to-BIM and 3D model generation using Revit and AutoCAD

Services:

• Architectural drafting and BIM modeling
• Structural detailing, steel and rebar modeling
• MEP shop drawings and clash detection
• Scan-to-BIM and point cloud conversion
• Revit family creation and content libraries

3. EIWAA Consultancy

EIWAA works across the UAE, with Revit-based BIM drafting built around both design input and on-site feedback. Models and drawings are created from PDFs, scanned plans, or laser point clouds – depending on where the project starts.

LOD ranges are covered from 100 to 500. On the architecture side, the focus is on ceilings, floor plans, and elevations. Structural work includes rebar and assembly-level modeling, often handled in Revit or SolidWorks for tighter site alignment. Models are handed off clean, formatted for coordination stages or final builds.

Key Highlights:

• Drafting and modeling support for UAE projects
• Uses Revit and AutoCAD for 2D and 3D production
• Capable of architectural rendering and visualization

Services:

• 2D to 3D BIM conversion for architecture and interiors
• AutoCAD to Revit file transitions
• HVAC, duct layout, and elevation drafting
• Structural modeling, rebar and steel detailing
• Scan-to-CAD and scan-to-BIM workflows

4. Al Khoory Solutions

Al Khoory handles BIM drafting from its Dubai office, working across architectural, structural, and MEP scopes. Revit is the base, with Tekla, AutoCAD, and Navisworks layered in depending on project demands. The approach is phased – rough early plans, coordination sets, and final as-builts, all prepped to match jobsite timing.

Architectural output includes curtain wall drawings and shop sets. On the structural side, most of the detailing starts from CAD inputs and moves into rebar and assembly-level modeling. MEP work covers HVAC, plumbing, electrical layouts – along with parametric content for prefab or product-linked elements.

Key Highlights:

• BIM drafting based in Dubai
• Coverage across structure, architecture, and MEP
• Support for LODs from concept through to field-ready

Services:

• Architectural shop drawings
• Structural detailing
• MEP 3D modeling and drafting
• Clash detection

5. Canntech Services Pvt. Ltd.

Canntech Services handles both drawing and BIM drafting support for construction projects in Dubai. A typical workflow starts with detailed 2D drawings – fully annotated and spec’d – to align project teams before site work begins. Models are developed for architecture, structure, and MEP, each tailored to fit the specific coordination and install needs.

Digital models are built with project adaptability in mind. That means quick updates, fewer rework cycles, and better clarity across disciplines. The focus stays on clean handoffs and reducing confusion as things move from design to execution.

Key Highlights:

• Drawing and BIM drafting handled for Dubai projects
• Clear technical documentation used to unify project teams
• Models and drawings adjusted to reflect changes midstream
• Architecture, structure, and MEP all covered in-house

Services:

• Drawing services with full specifications and annotations.
• BIM drafting solutions tailored to project requirements.
• 3D BIM modeling for architecture, structure, and MEP systems.
• BIM coordination and clash detection.

6. Engisoft Engineering

Engisoft Engineering handles BIM and CAD documentation from Dubai, with a workflow that spans architecture, structure, interiors, and infrastructure. Projects range from residential to commercial to industrial. The format shifts depending on what’s needed – standard CAD drawings, Revit-based models, or scan-to-BIM if site data’s already in hand.

Modeling covers parametric elements, HVAC routing, and coordinated shop drawings. Civil and site plans also run through the same pipeline. Deliverables are prepped to match UAE codes and field standards, and team structure flexes for on-site or remote coordination depending on how the job’s set up.

Key Highlights:

• BIM drafting and CAD files prepared in Dubai
• Covers multiple building types and disciplines
• Transition support from CAD to BIM
• Files formatted for field use and permitting

Services:

• Architectural and structural 2D drafting
• Revit-based BIM modeling and family creation
• Scan-to-BIM and point cloud integration
• MEP drafting and coordination files
• Floor plans, HVAC layouts, and civil site plans

7. Capstone Technologies

Capstone Technologies works across BIM drafting and multidisciplinary engineering in Dubai, with coverage across architecture, structure, and MEP. Revit, Tekla, and AutoCAD are used for 3D models, shop drawings, and clash files, with documentation formatted for permitting, coordination, and handover. Architectural drafting includes CAD plans, elevations, and sections structured for planning approvals.

Outside BIM, Capstone handles industrial and infrastructure work, including engineering support for oil and gas projects. All deliverables follow Dubai Municipality and UAE-specific codes, with ISO-aligned workflows in place. The focus stays on clarity – documents built to support prefabrication, sequencing, and site install.

Key Highlights:

• BIM and AutoCAD drafting delivered in Dubai
• Revit and Tekla used for structural and architectural detailing
• Integrated coordination with MEP and civil teams
• Documentation aligned with UAE standards and ISO practices

Services:

• Revit-based architectural and structural modeling
• AutoCAD drafting for plans, layouts, and detailing
• Clash detection and BIM documentation for fabrication
• Shop drawings and coordination models

8. Alwarqa Survey Engineering

Alwarqa Survey Engineering runs BIM and Revit modeling as part of a broader survey and documentation pipeline in Dubai. Projects typically include CAD conversions, 3D modeling, and Revit family creation. Outputs are structured for construction use, with coordination built into the drafting process.

Support includes clash detection, quantity takeoffs, and deliverables for commercial, industrial, and oil and gas builds. Parametric models and project-specific detailing are handled in-house. Conflict resolution is part of the routine, with BIM workflows tuned to keep all teams aligned.

Key Highlights:

• BIM drafting and documentation prepared in Dubai
• Revit support across architectural, structural, and MEP scopes
• CAD to BIM conversion and drawing standardization
• In-house clash detection and coordination

Services:

• BIM drafting and construction drawings
• MEP clash detection and conflict resolution
• Parametric Revit family creation
• Quantity takeoffs and cost analysis
• 3D modeling and CAD conversions
• BOQ documentation and shop drawings

9. Advenser

Advenser delivers BIM services in Dubai across architecture, structure, MEP, and precast. Models are built for all LOD stages, with outputs like coordination sets, shop drawings, and fabrication files. The team also works on digital twin and VDC support for modular builds.

Revit and Navisworks are the primary tools, used for modeling and clash detection. Deliverables include curtain wall documentation, millwork details, and spool drawings for MEP. Project experience covers commercial, healthcare, infrastructure, and industrial sectors – including both traditional and offsite construction formats.

Key Highlights:

• BIM drafting services delivered in Dubai for AEC sectors
• Covers LOD 100 to 500 documentation levels
• Point cloud to BIM and as-built modeling included
• Supports modular, civil, and interior BIM scopes

Services:

• Architectural, structural, and MEP BIM modeling
• Shop drawings and fabrication detailing
• Curtain wall and façade documentation
• Precast and steel detailing
• Quantity takeoffs and 5D BIM support

10. BIM Craft Solutions

BIM Craft Solutions works out of Dubai with a focus on BIM drafting across architecture, structure, and MEP. Revit, AutoCAD, and Navisworks are the core tools. Models are built to match each project’s scope – from early-stage concepts through to detailed construction sets and as-builts. Coordination files, clash checks, and even 4D/5D planning are handled in-house.

Support extends across healthcare, infrastructure, housing, and oil and gas. LODs run from 100 to 500, depending on where the project stands. Models are used for everything from basic visualization to FM handover and renovation work. Civil detailing, scan-to-BIM, and cross-discipline integration are part of the normal flow.

Key Highlights:

• BIM drafting services active in Dubai
• Models structured across architectural, MEP, and structural disciplines
• Scan to BIM and as-built modeling supported
• Civil and infrastructure detailing included

Services:

• Revit-based architectural and structural BIM modeling
• MEP design and drafting services
• Clash detection and coordination workflows
• Quantity takeoffs and construction scheduling

Conclusion

Choosing a BIM drafting partner in Dubai isn’t about who lists the most services – it’s about who actually understands how a project moves from model to site. Clean documentation, fewer coordination surprises, and files that hold up under pressure – that’s what makes the real difference once things hit the ground.

The firms listed here take different routes. Some focus on tight digital coordination. Others push faster shop drawing delivery or specialize in specific scopes. But all of them reflect where the region is heading: less patchwork 2D, more connected, model-based workflows. And in a place like Dubai, where timelines rarely wait, that shift isn’t optional – it’s how things stay on track.