10 Best COBie Companies in Leeds (2026)

Anyone who’s handed over a building project only to watch the client struggle with the data afterward knows why COBie matters. It’s not the flashiest part of construction tech, but getting asset data structured and handed over properly can save months of headaches once a building is actually in use. Leeds has become something of a hub for this kind of work, with a mix of engineering consultancies, BIM specialists, and software platforms all circling the same problem from different angles. Below is a rundown of companies worth knowing if COBie coordination is on your project checklist.

2. Silcock Leedham

Silcock Leedham is a building services engineering consultancy headquartered in Horsforth, Leeds, working across mechanical, electrical, and public health system design. The company was founded in 2001 by Mike Silcock and Bill Leedham and became a limited company in 2010, and it has since taken on projects of varying size across sectors including healthcare, education, manufacturing, and infrastructure, alongside work reaching as far as the UAE. The firm is part of the RSK group of companies, and Building Information Modelling sits at the center of how it delivers projects, using Revit and Navisworks alongside a standard set of COBie schedules built for suppliers and manufacturers to populate directly in the BIM environment. Net zero carbon design runs alongside its engineering work through its partnership with zero energy design (zed.), rather than sitting apart as a separate service. أبرز الملامح الرئيسية:

• Part of the RSK group of companies
• Works across science, healthcare, education, and infrastructure sectors
• International project experience beyond the UK

الخدمات:

• COBie schedule development for suppliers and manufacturers
• تصميم النظام الميكانيكي والكهربائي
• Public health engineering design
• Building Information Modelling and digital engineering
• Sustainable and net zero carbon design

3. Infinite BIM

Infinite BIM is a BIM consulting group based in Leeds, working with design and construction firms on the technical side of Building Information Modelling. The company traces its BIM experience and supports clients through the full BIM lifecycle, from initial implementation and training through to ongoing project support and advisory work. Its client base runs from smaller design practices to larger international consultants. Services include Revit modelling, clash management, supply chain validation, and COBie data validation, along with support for ISO 19650 certification. The company works directly with clients on BIM performance issues rather than handing over generic guidance, which fits the more hands-on role it takes with SMEs and firms newer to structured BIM processes. أبرز الملامح الرئيسية:

• BIM experience
• Works with SMEs and international design consultants
• Supports ISO 19650 certification processes

الخدمات:

• COBie data validation
• Revit modelling
• إدارة التصادم
• Supply chain validation
• BIM implementation and training support

4. Solibri

Solibri develops a BIM validation platform used by architects, engineers, contractors, and infrastructure organizations to check model data before it moves further into a project. The software applies rule based validation to BIM models, checking geometry, data, and classification so that errors get caught in the model rather than later on site. This includes flagging geometric conflicts, information inconsistencies, classification misalignment, and compliance gaps before they turn into costlier problems during construction. The platform is built to work across the building lifecycle rather than as a one-off check at a single project stage. Design decisions carry through into coordination, coordination into construction, and construction into how a building eventually gets operated and maintained, so Solibri treats validation as something that runs continuously through digital delivery rather than a single gate before execution. أبرز الملامح الرئيسية:

• BIM validation platform used across the construction industry
• Applies rule based checks to geometry, data, and classification
• Supports validation across the full building lifecycle
• Used by architects, engineers, contractors, and infrastructure firms

الخدمات:

• COBie data collection, validation and export software
• التحقق من صحة نموذج BIM
• Clash and conflict detection
• Data and classification consistency checks
• Lifecycle based quality assurance for BIM models

5. CGP MEP

CGP MEP is a building services consultancy with offices in London and Leeds. The office operates out of Royal House on Sovereign Street, and the firm’s project list includes local work such as a residential development on Whitehall Road in Leeds, alongside projects across the rest of the UK. The company’s teams include mechanical and electrical engineers, Revit coordinators, and an associate BIM manager, which shapes how it handles coordination and data delivery on projects that need clash-free models and structured handover information. CGP MEP works across residential, commercial, education, leisure, and healthcare sectors, and holds ISO 9001, ISO 14001, and ISO 45001 certification. أبرز الملامح الرئيسية:

• Offices in London and Leeds
• Delivered a residential project
• ISO 9001, 14001, and 45001 certified

الخدمات:

• BIM coordination and Revit modelling
• Mechanical and electrical building services design
• Clash detection across MEP systems
• Sustainability and energy consultancy
• Building services engineering across multiple sectors

6. سويكو

Sweco operates as part of Sweco, Europe’s largest design, engineering, and environmental consultancy, with its UK head office registered in Leeds. The firm brings together architects, engineers, and other consultancy specialists across UK and international hubs to work on buildings, transport, water, energy, mission critical infrastructure, and wider sustainable development projects. Information management sits at the center of how Sweco runs BIM delivery, covering everything from Organisational and Asset Information Requirements through to COBie production and validating information received from the project team on the client’s behalf. That work sits alongside model federation, clash detection, and Common Data Environment advisory, giving clients a route from early design data structuring through to construction coordination and handover under one roof. أبرز الملامح الرئيسية:

• Part of Sweco, a European design, engineering, and environmental consultancy
• Covers buildings, transport, water, energy, and mission critical infrastructure
• Runs COBie production as part of its information management services

الخدمات:

• COBie production and information validation
• BIM information management and ISO 19650 documentation
• Model federation and clash detection
• Common Data Environment advisory
• Building services engineering and building control

7. Anderson Green

Anderson Green is a privately-owned building services consultancy, with an office in Leeds alongside locations in Nottingham, Sheffield, and London. They cover mechanical and electrical design, energy and carbon consultancy, building physics, and compliance work, alongside a dedicated M&E cost consultancy practice built around an in-house cost database. BIM sits within its own service line, run by BRE-accredited practitioners and Level 2 BIM certified staff working across Revit and related design software. That work covers BIM documentation, model management audits, model federation, and clash detection, alongside general BIM and COBie process management, giving clients a structured route from early design coordination through to the data handover a completed building needs. أبرز الملامح الرئيسية:

• Office in Leeds, alongside Nottingham, Sheffield, and London
• BRE BIM accredited with Level 2 certified practitioners
• Runs a dedicated M&E cost consultancy practice

الخدمات:

• BIM and COBie process management
• Model federation and clash detection
• Mechanical and electrical design
• Energy, carbon, and sustainability consultancy
• M&E cost consultancy

8. أروب

Arup is a global design, engineering, and sustainability consultancy with an established office in Leeds, now based at Wellington Place after outgrowing its previous space. The firm covers a wide range of built and natural environment services, from structural and building services engineering through to planning, digital, and climate consultancy, and its Leeds team has worked on regional projects including the University of Leeds Sir William Henry Bragg Building, where digital modelling was used to cut costs and reduce waste during the retrofit. Building Information Modelling runs through much of that work, with Arup having developed its own global Revit and Tekla standards to keep data consistent across projects and locations. The firm has also built internal tooling to automate COBie output generation directly from BIM models, feeding equipment and room datasheets through to project handover rather than compiling that data manually at the end of a project. أبرز الملامح الرئيسية:

• Delivered BIM-based retrofit work for the University of Leeds
• Developed global Revit and Tekla data standards
• Built internal tooling to automate COBie output from BIM models

الخدمات:

• COBie output automation and BIM data management
• نمذجة معلومات البناء (BIM)
• Building services engineering (MEP)
• الهندسة الإنشائية والمدنية
• Digital and sustainability consultancy

9. شركة سيليكون للاستشارات الهندسية

Silicon EC UK Ltd is a BIM and CAD services provider delivering digital construction solutions for architects, engineers, contractors, and building owners across the UK. The company specializes in BIM modelling, MEP coordination, structural modelling, Scan-to-BIM, clash detection, and technical drafting, helping project teams create accurate digital models and improve coordination throughout the design and construction process. Its BIM services are marketed to clients across the UK, including Leeds, supporting projects that require detailed information-rich models and digital delivery workflows. COBie forms part of Silicon EC’s dedicated BIM service offering, with the company providing COBie modelling and structured asset information preparation for digital handovers. Its COBie workflows focus on organizing operational data such as equipment details, manufacturer information, warranties, and maintenance records into formats that support facilities management and lifecycle asset management. By combining BIM expertise with COBie delivery capabilities, Silicon EC helps construction teams move from traditional document-based handovers toward more structured digital asset information. أبرز الملامح الرئيسية:

• Provides dedicated COBie modelling and asset information delivery services
• Supports BIM projects for Leeds and wider UK markets
• Creates structured asset data for digital handover and facilities management

الخدمات:

• COBie modelling and COBie spreadsheet creation
• BIM modelling and coordination
• خدمات الهندسة الميكانيكية والكهربائية والسباكة ونمذجة معلومات المباني والإنشاءات
• Scan-to-BIM and CAD drafting
• Asset information management and digital handover support

10. Virtually Built MEP

Virtually Built MEP is a digital construction company based in London that takes on projects across the UK and internationally. The company works across Fit Out, commercial, residential, data centre, and education projects, covering work from early concept through to project completion. Coordinated services drawings sit at the center of what the company does, supporting construction teams through the technical detail of MEP delivery. Its service range includes 3D building coordination, BIM management, and clash detection, alongside COBie and asset data management work that ties into building handover requirements. The company also offers point cloud laser scanning and scan to BIM modelling, along with more basic 2D draughting for schematics and detail drawings, giving clients a mix of newer digital methods and simpler drafting support depending on what a project calls for. أبرز الملامح الرئيسية:

• Based in London, UK, with international project experience
• Works across Fit Out, commercial, residential, and data centre sectors
• Provides COBie and asset data management services
• Offers both advanced BIM tools and basic 2D draughting

الخدمات:

• COBie and asset data management
• 3D building coordination and clash detection
• إدارة BIM
• Point cloud laser scanning and scan to BIM modelling
• 2D draughting

الخاتمة

COBie sounds like a small piece of the puzzle until you’re the one trying to run a building six months after handover with no clue what’s behind a wall or when a piece of plant is due for servicing. That’s really the whole point of doing this work properly from the start, and it’s why the companies in this list approach it from such different angles – some build the models, some validate them, some capture the physical building through a scan before any of that data gets structured at all.

What’s worth noticing is how much of this work happens well before a building is finished. Getting COBie right isn’t a box to tick at the end of a project, it’s something that has to be built into the process from early design through to the final handover package, and the firms working in Leeds and beyond who take that seriously tend to be the ones asking pointed questions about data structure long before anyone’s talking about keys and move-in dates.